Washes are a multi-purpose product with limitless possibilities. Washes can be used alone or with any glaze from low fire (cone 06/05), mid-range (cone 5/6), and up to high-fire (cone 10). They are primarily used painted into textured areas and wiped away on the higher surface to accentuate the texture. It works great for stenciling, stamping and silkscreening as it is a very stable product.
Chips shown are fired flat on a white clay body fired to cone 6 oxidation and cone 10 reduction. The choice of clay body, the thickness of glaze application, the firing process, and temperature will affect the fired results.
Rutile Wash fires to an opaque pale burnt orange with a smooth matte finish. It works great for stenciling, stamping and silkscreening as it is a very stable product. When using in combination, apply a transparent and stable glaze such as a celadon or clear glaze to ensure stability in performance and maintaining details. Can be layered with other glazes to promote interactions and does not add much movement to combinations. Rutile Wash also works great as a body stain. Applying clear glaze can lessen the appearance of staining.
Cone 6 oxidation (larger image): Fires to an opaque deep rust red with a slight sheen when applied fully concentrated. This product will leave red body staining when wiped away. Little to no movement when used alone or in combination.
Cone 06 oxidation (smaller image): Fires to an opaque mustard yellow with a dry finish. Little to no movement when used alone or in combination.
::
- Any questions? You can call us at: Phone +1 (514) 660 6809
----------------------
Let us know when you want to pick up you product(s).
Service hours:
* Tuesday to Friday from 10am to 3pm. (Extended hours are common until 7pm but please check with us before to make sure we will be opened).
* Saturdays from 11am to 3pm.